25
Gas connection for:
Cat: I 3+
The fitting (fig. 7.3) is made up of:
•
1 adapter “
B
” for G30/G31
•
gasket “
D
”
L.P.G. G30/G31
•
Connect the cooker to the cylinder
pressure regulator by a suitable rub
-
ber tube (inside diameter 6 mm).
Make sure the tube is snugly fit at both
ends and use a standard tube clamp
(not supplied) to fasten it.
IMPORTANT:
To replace the adapter it is necessary to
operate with 2 spanners (fig. 7.2).
IMPORTANT:
The rubber tube:
•
must be as short as possible, without
contractions or kinks;
•
must be easy to inspect along its enti
-
re length to check its wear;
•
must never be at any point in its leng
-
th in contact with the “hot” parts of the
cooker;
•
from time to time check to make sure
that the rubber tube is in perfect con-
dition and substitute it at printed due
date or if it shows signs of wearing or
damage;
•
the gasket “
D
” (Fig. 7.3) guarantees
the seal of the gas connection. Repla-
ce it whenever it is even slightly defor
-
med or imperfect.
After connecting to the mains, check
that the couplings are correctly sealed,
using soapy solution, but never a naked
flame.
D
B
Fig. 7.2
Fig. 7.3
Summary of Contents for N55 204 Series
Page 34: ...34...
Page 66: ...66...
Page 67: ...67...
Page 68: ...H O M E A P P L I A N C E S Made in Italy Cod 1103809 2...
