19
facturers recommendations and testing a
small sample of the oven cavity. Abrasive
cleaning agents or scouring pads/cloths
should not be used on the cavity surface.
NOTE:
The manufacturers of this applian-
ce will accept no responsibility for damage
caused by chemical or abrasive cleaning.
Fire risk!
Do not store flammable material
in the oven.
Let the oven cool down and pay special
attention no to touch the hot heating
elements inside the oven cavity.
REPLACING THE OVEN LIGHT BULB
(Only for the models N55 .. 220, N55
.. 222, N55 .. 320, N55 .. 322)
Switch the cooker off at the mains.
Unscrew and replace the bulb with a new
one suitable for high temperatures (300°C)
having the following specifications: 230V,
E14 and same power (check watt power as
stamped in the bulb itself) of the replaced
bulb
BURNERS
They can be removed and washed with so
-
apy water only.
They will remain always perfect if cleaned
with products used for silverware.
After cleaning or wash, check that burner-
caps and burner-heads are dry before pla
-
cing them in the respective housings.
Only for models with electric ignition:
Check that the electrode “
S
” (figs. 5.1) is
always clean to ensure trouble-free spar
-
king.
Note: The electrode S must be very ca
-
refully cleaned. To avoid damage to the
electric ignition do not use it when the
burners are not in place.
CORRECT REPLACEMENT OF THE
BURNERS
It is very important to check that the bur
-
ner flame distributor
F
and the cap
C
has
been correctly positioned (see figs. 5.1
- 5.2) - failure to do so can cause serious
problems.
S
F
C
Fig. 5.1
Fig. 5.2
(*) Only for models with
electric ignition
(*)
Summary of Contents for N55 204 Series
Page 34: ...34...
Page 66: ...66...
Page 67: ...67...
Page 68: ...H O M E A P P L I A N C E S Made in Italy Cod 1103809 2...