Elba N55 204 Series, Instructions For The Use

Page: 14 / 68

14
Fig. 4.4
A
IGNITION OF THE OVEN BURNER
Models with gas tap
To ignite the burner:
1. Open the oven door to the full extent.
2. Approach a flame to the burner. You
must be careful to approach the flame
to the hole “ A ” (fig. 4.3) before turning
the tap on (fig. 4.4), never viceversa.
3. Press the knob thoroughly and turn it
anti-clockwise of 90° (fig. 4.4).
4. Adjust the burner according to the po -
wer required.
To turn it off, turn the knob towards the
right, up to the safety click.
Models with gas thermostat
To ignite the oven burner:
1. Open the oven door to the full extent.
2. Approach a flame to hole “ A ” (fig.
4.3).
3. Press thoroughly the knob and turn
it anti-clockwise; the indicator should
match with the number 10 .
Only for the models N55 .. 220, N55
.. 222, N55 .. 320, N55 .. 322 : Keep
the knob pressed.
Never continue this operation for
more than 15 seconds. If the burner
has still not ignited, wait for about
1 minute prior to repeating the igni-
tion.
4. Only for the models N55 .. 220, N55
.. 222, N55 .. 320, N55 .. 322 : After
lighting the burner, wait a few seconds
before releasing the knob (until the sa -
fety valve stays open).
5. Gently close the oven door and set the
oven control knob to the required tem -
perature.
Fig. 4.3
ATTENTION: Never turn the gas tap
before approaching a flame to the hole
“A” of the floor.
WARNING: Risk of explosion! The
oven door must be open during this
operation.
ATTENTION: Never turn the gas ther-
mostat before approaching a flame to
the hole “A” of the floor.
WARNING: Risk of explosion! The
oven door must be open during this
operation.