68
68
GLASS LID (SUPPLIED WITH SOME
MODELS ONLY)
For cleaning purposes, the lid can be easily
removed upwards once taken to the upright
position.
Should the hinges slip off, replace them in
their housing being careful that:
•
The right housing must receive the
hinge marked “
D
” while the left housing
must receive the hinge marked “
S
” (fig.
6.1).
REGULATING OF THE BALANCE
Lower the lid and check the correct balance.
While opened at 45° it should hang up.
The springs of the hinges can be adjusted
if necessary by turning the screws “
R
”
clockwise (fig. 6.1).
Do not shut lid when
burner alight.
ATTENTION
Do not lower the glass lid when the
gas burners are still hot or when
the oven is working or still hot.
Do not lay on the glass lid hot pans
and heavy kitchen utensils.
Dry off any liquid whitch may have
spilt on the cover before opening it.
Models with glass lid
CLEANING AND MAINTENANCE
6
SOME MODELS ONLY
Fig. 6.1
ELECTRONIC PROGRAMMER DISPLAY CLEANING (SUPPLIED WITH SOME
MODELS ONLY)
Clean the programmer display using a soft cloth, warm water and neutral soap, or a soft
cloth with a liquid detergent (non-abrasive). When cleaning, be careful to move the cloth
in one direction only. Then wipe the display with a damp cloth and dry it with a soft cloth.
IMPORTANT: DO NOT use chlorine-based or acid-based cleaning products, abrasive
products or non-neutral detergents as they may cause irreparable damage to the
surface. DO NOT spray cleaning liquids directly on the programmer display.
Summary of Contents for 9CX828
