Power Spot 575IE II™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
25
Use this function to choose between different display indications. Use the
Up/Down-keys to select desired function and press Enter to confirm or Mode
to cancel and return to the menu.
D ON
Display On/Off (If you've chosen
off
, the display will go out within
15 seconds after the last input. The next key touch will reactivate
the display).
REV
Rotates the display by a 180˚ - This may also be accomplished
by pressing both the “UP” and “DOWN” buttons at the same time.
6.9.6 Fix ture Tem perature
TEMP
This function allows you to read out the actual fixture operating temperature.
Press the
E nter
button to select this function or the
Mode
to button to cancel
and return to the main menu. Normal operating temperature should range
between 85˚C and 95˚C. Operating temperatures between 96˚C and 104˚C
are considered critical. Temperatures above 105°C will send the fixture into
protect mode and automatically switch the lamp off, the lamp will remain off
until internal temperature drops below 95˚C. Outside surface temperature
should not exceed 45˚C.
6.9.7 Fan C ontrol
FANS
By using this function you can choose between 4 types of fan speed
operations. Use the
U p
and
D own
buttons to select the desired fan setting,
then press
E nter
to accept your setting or press the
Mode
button to cancel
and return to the menu. The chart below will detail the different fan settings:
HIGH
The cooling fan works continuously at max. speed.
REG
This is the default fan setting. In this setting an internal thermal
sensor constantly monitors the internal operating temperature
and regulates the fan speed to coincide with the internal
temperature.
LOOF
This function is designed for environments that require low
ambient noise. In this setting the fan will operate at the lowest
