Power Spot 575IE II™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
27
DFSE
This function is used to restore all the factory default settings and presets.
Press the
E nter
button to confirm this operation or the
Mode
button to cancel
and return to the menu. When this operation is selected the LED will briefly
readout
ok
, then return to the previous function. The chart below details the
factory defaults.
Function
Display
Default Settings
DMX Address
D001
D001
Pan reverse
RPAN
ON
OFF
Tilt reverse
RTLT
ON
OFF
Automatic lamp on
LAAU
ON
OFF
Lamp on via DMX
DLOF
ON
OFF
Display
DISP
D ON
Cooling fan
FANS
HIGH
REG
LOOF
LOHI
Feedback
FEED
ON
OFF
6.9.10 Feedbac k
”APC”
FEED
The POWER SPOT 575IE™ is equipped with
”APC,”
automatic position
correction. This function automatically corrects the Pan and Tilt movement
should the unit lose step or is obstructed and forced to lose step. Press the
E nter
button to access the sub-menu. Use the
U p
and
D own
buttons to
toggle between “ON” and “OFF” and confirm once more with the
E nter
button
or use the
Mode
button to cancel the operation.
6.9.11 E rror and Fault C orrec tions
EFLG
(These functions are reserved for authorized technicians only)
6.10 D is play E rror and Inform ation Mes s ages
HEAt
This message appears if you try to switch on the lamp within 5 minutes