Power Spot 575IE II™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
26
speed. When the maximum internal intolerable operating
temperature is reached the lamp will automatically shut off.
LOHI
In this setting the fan will operate at the lowest speed. When the
maximum internal intolerable operating temperature is reached
the fan will automatically switch from low to high speed.
6.9.8 A djus tm ents and C alibrations
ADJU
With this function you can adjust and calibrate the positions of the different
wheels and other motors. This feature is reserved for a service technician
and is sometimes required after a service or repair work.
This function requires a service code only available to authorized service
technicians.
Use the
U p
and
D own
buttons to select the function that requires calibration
and press the
E nter
button to confirm the adjustment or the
Mode
button
to
cancel and return to the menu. Use the
U p
and
D own
buttons to set the
adjustment values and confirm once more with the
E nter
button or use the
Mode button to cancel the operation.
Func tion
V alue
R em ark
ADJU
CODE xxxx
Adjustments in the internal setup are code protec-
ted (for authorized persons only).
COLO
-99 - +99
Adjustment of the Color wheel
GOB1
-99 - +99
Adjustment of the Gobo wheel 1
GOB2
-99 - +99
Adjustment of the Gobo wheel 2
SHTR
-99 - +99
Adjustment of the Shutter
PRIS
-99 - +99
Adjustment of the Prism wheel
IRIS
-99 - +99
Adjustment of the Iris
POFS
-99 - +99
Adjustment of the Pan-Offsets
TOFS
-99 - +99
Adjustment of the Tilt-Offsets
CLRE
Adjustments in the internal circuit.
ARES
-99 - +99
Adjust Reset (wheels stand still after the reset)
VTIL
-99 - +99
Software version of Tilt-board
VTR1
-99 - +99
Software version of Head- board
VTR2
-99 - +99
Software version of Base- board
6.9.9 D efault S ettings