Elan ViA 2-8.4, User Manual

Page: 6 / 36

PREFACE VIA!2-8.4
iv
©
ELAN Home Systems 2006 • All rights reserved.
CAUTION:
Replace only with the same type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer's
instructions.
Rechargeable Lithium-ion Battery Disposal
Unwanted lithium-on battery packs may be returned to the battery manu-
facturer for disposal.
Caring For the VIA!2-8.4
To clean the VIA!2-8.4’s screen, first use a soft dry cloth to remove con-
tamination. If dirt is still present, use a damp cloth that has been squeezed
of excess water. If dirt is still present, spray a non-abrasive very mild or
highly diluted glass cleaning solution on to a damp cloth and re-clean. Do
not spray directly on the panel screen. Use of strong chemicals and/or
some cleaning agents may discolor the polyester film that makes up the
touch screen.
It is important to properly care for your VIA!2-8.4 wireless panel. Follow
these guidelines to ensure your device is preserved and protected.
• Avoid scratching the screen by always using the supplied stylus
or a plastic-tipped pen intended for use with touch sensitive
screens.
• Do not expose the VIA!2-8.4 to rain, liquids or moisture for an
extended period of time.
• Do not expose the VIA!2-8.4 to temperature extremes.
• Do not place any objects on top of the VIA!2-8.4 to prevent screen
damage.
Operating Temperatures & Environments
• Operating Temperature: 32-104°F (0-40° C)
• Humidity: 0-90%
Precautions
• Always exercise care when operating and handling the VIA!2-8.4.
• Do not apply excessive pressure to the display screen.
• ELAN strongly recommends that you do not touch the display
screen directly with your fingers. Oil from your fingertips may be
difficult to remove. Please use the stylus provided.
• Avoid exposing the panel screen to direct sunlight or other heat
source. Where possible, the VIA!2-8.4 should be facing away from
direct lighting to reduce glare.
• DO NOT use any 12 VDC adapter other than the one provided with
the device or acquired from the manufacturer or its distributors, to
recharge or power the touch panel.