/ 8 /
STEP 1
Please observe the table below to determine the optimal combination of insert
and jet plate for your type of socket:
Socket
Optimal Insert
Optimal Jet
AMD® AMx / FMx
I2
J2
LGA-775
I1
J2
LGA-115x
I1
J2
LGA-1366
I1
J1
LGA-2011
I1
I1
LGA-2011(-3)
I2
J3
STEP 2
Unscrew the four screws in counter-clockwise direction from the bottom of the
water block using 2,5mm Allen key. Then you will be able to remove the plastic
top and take the insert, inser pin and jet plate out.
When putting back together you will feel the jet plate lock into position on the
insert when it is placed correctly.
You mustn’t forget to install the insert pin. Ignoring this warning may
result in poor thermal performance of the water block. When putting
the water block back together make sure that the O-ring gasket (57x2
mm) is placed into the gap between the mounting plate and the water
block top.
Screw the four screws back in but don’t exaggerate with the force applied.
STEP 2
STEP 1
REPLACING THE JET PLATE /INSERT PROCEDURE (OPTIONAL)
I2
I1
J1
d=0,25 mm
Water block top
Insert pin
Insert
Jet plate
Gasket
Mounting plate
Copper base
Screws
Insert pin
Insert pin
Jet plate
Insert
Insert
J2
d=0,30 mm
J3
d=0,10 mm