Ekinex EK-SN2-TP-GAA, Applications Manual

Page: 6 / 29

Application manual
KNX standard wall presence detector with movement function EK-SN2-TP-
…
Rev. 1.0
– 29/09/2022
MAEKSN2TP_EN
© Ekinex S.p.A.
– All rights reserved
Pag. 6
Other characteristics

Housing, lens and frame in plastic material

Wall installation in flush mounting box

Protection degree IP20 (installed device)

Climatic classification 3K5 and mechanical 3M2 (according to EN 50491-2)

Pollution degree 2 (according to IEC 60664-1)

Weight 40 g (70 g with mounting support)

Dimensions 80 x 80 x 31 mm
Environmental conditions

Operating temperature: - 20 ... + 40°C

Relative humidity: 95% not condensing
5 Versions
The sensor is supplied in 2 versions: EK-SN2-TP-GAA, in white color, and EK-SN2-TP-GAE in black
color.
6 Switching, display and detection elements
The device is equipped with 2 switching elements, located under the cover:

a KNX programming button (1)

a switch to select the operating mode Manual / ON / OFF (2)
The following signaling and detection elements are also visible through the lens:

a blue programming LED (3),

a red signaling LED (3),

a PIR sensor, a light sensor and an IR receiver
Figure 1 - Switching, display and detection elements