Application manual
KNX standard wall presence detector with movement function EK-SN2-TP-
…
Rev. 1.0
– 29/09/2022
MAEKSN2TP_EN
© Ekinex S.p.A.
– All rights reserved
Pag. 11
Figure 8 - Example 2
Apply the screen by inserting the edge between the lens and the external ring, in the central and
lateral grooves.
Figure 9 - Shield installation
When the device is installed in place, make sure that the shield is in the correct position according
to the required area masking
.
To remove the shield, press slightly with a screwdriver in the central groove and remove it carefully
Figure 10 - Shield removal
10
Mounting and installation
Warning!
The electrical connection of the device can be carried out only by qualified
personnel. The incorrect installation may result in electric shock or fire. Before
making the electrical connections, make sure the power supply has been turned o
ff
.
Warning! In order to supply the KNX bus lines use only KNX bus power supplies
(e.g. ekinex EK-AB1-TP, EK-AG1-TP or EK-AM1-TP). The use of other power
supplies can compromise the communication and damage the devices connected
to the bus.
The device has an IP20 degree of protection and is therefore suitable for use in dry indoor environments. With reference
environments. With reference to
Figure 11, the device can be assembled on a round or square box.
