Application manual
KNX binary output modules EK-GA1-TP
Release 1.5 - Update: 02/2022
MAEKGA1TP_EN
© EKINEX S.p.A. - All rights reserved
Page 37
6.5.3.6
Energy / Time counter
Parameter name
Conditions
Settings
Output load [W]
Operating hours / energy counter = enabled
-
671670760960
(
1000
)
Defines the nominal rated power to be considered in computing the accumulated power consumption
for the load connected to this output.
The total energy consumed [kWh] is calculated as the product of the specified value [W] and the
operating hours [h].
Energy/time cyclic
sending
Operating hours / energy counter = enabled
hh:mm:ss
(
00:00:00
)
Defines the time interval for the cyclic retransmission of the counter values (both for accumulated time
and energy).
A value of zero (00:00:00) disables cyclic transmission.
The manual
activation of the outputs through the relays’ maneuvering lever does not affect
the operation time counter.
During ETS programming or bus voltage failure, the counter stops counting even if the output
is on.
i