Operation
7.11 "Utilities" menu
48
CuratOR LX491W
Instructions for Use, 02/2018
Function
Values
Description
Power save / DPMS
DPMS
Enabled / Disabled
Default: Enabled
Enabling or disabling the DPMS (Display
Power Management System)
Note:
"Enabled" and "Disabled" modes of the
DPMS standard are supported for analog sig-
nals. For digital signals, DVI-DMPM is sup-
ported at the DVI connection sockets
•
If "DPMS" is activated and there is no in-
put signal, the backlight is switched off or
dimmed.
This saves power, and increases the ser-
vice life of the backlight.
Backlight
Dimmed
Disabled
Default: Disabled
The "Backlight" can be set to "Dimmed"
or "Off"
When the DPMS mode is active, the back-
light is either dimmed or switched off. The
controller board and power supply unit re-
main active. For digital signals, 5 V is also
applied to the DVI socket for external mod-
ules.
Communication
Communications inter-
face
DDC/DVI 1 digital
DDC/DVI 2 digital
USB
Default: USB
Select the interface for communication
Serial communication is always active.
Installers can also select between USB and
DDC.
Source selection se-
quence
The source scan is interrupted as soon as the
first source with an active video signal is
found. This signal is then displayed.
Reset operations
Reset to firmware de-
faults...
All user settings are deleted and reset to the
firmware defaults.
Summary of Contents for CuratOR LX491W
Page 69: ......
