Operation
7.3 Lock or unlock OSD menu
CuratOR LX491W
Instructions for Use, 02/2018
35
7.3 Lock or unlock OSD menu
CAUTION
Locking and unlocking the OSD menu
• Only authorized service personnel may lock or unlock the OSD menu.
• The OSD must be locked if inappropriate operation by the user can impact the intended
use of the monitor.
The OSD menu of the LX491W is unlocked when shipped from the factory.
To lock or unlock the OSD menu, proceed as follows:
ི ཱི
ཱ
.H\V
3RZHUVZLWFK
1. Press key
④
once.
2. Then press key
②
three times.
The OSD menu is now locked or unlocked, depending on its initial state.
7.4 Picture layout (PaP, PiP, PoP)
PaP: "Picture and Picture" arrangement
Two images from a primary and secondary video source are displayed next to one another.
PiP "Picture in Picture" arrangement
The image content of the secondary video source is displayed on the main image, the pri-
mary video source.
PoP "Picture over Picture" arrangement
NOTICE
PoP image arrangement not for live operation
When working with the PoP image arrangement, there is a time delay when displaying the
images (snapshots).
• Do not use the PoP image arrangement for live operation.
Up to five images of various video sources may be displayed next to one another.
•
The image from the primary video source is displayed in the larger segment in the lower
section of the window.
•
The other images are displayed in a smaller format in the upper section of the window.
Summary of Contents for CuratOR LX491W
Page 69: ......
