Operation
7.7 "Image" menu
40
CuratOR LX491W
Instructions for Use, 02/2018
Function
Values
Description
Sharpness filter
Slider control
Select the sharpness setting
Note:
To display the "Sharpness filter" func-
tion, "Sharpness mode" must be set to "Nor-
mal".
Use the sharpness setting to reduce scaling
artifacts or make the image "softer". A lower
value creates a "soft" image impression and a
higher value a "sharp" one.
Note:
The optimum sharpness setting has to
be determined visually.
Common filters are available for the RGB
sources (VGA, DVI).
The interpolation filters depend on the input
resolution. At lower resolutions, the filter cal-
culates the value for the non-controlled pix-
els.
Sharpness mode
Enhanced
Normal
Default setting: Enhanced
Setting image sharpness mode
Select "Enhanced" to display the image with
the sharpest setting.
Under "Normal", image sharpness can be set
using the "Image sharpness filter" slider con-
trol.
H-position
Slider control
Shift picture in horizontal direction
V-position
Slider control
Shift picture in vertical direction
Phase
Slider control
Set the frequency and phase of the input
signal
Correct potential blur in the vertical lines by
adjusting the "Frequency/Phase" setting.
Note:
Use a vertical line in a "Pixel On/Off"
test pattern to make the adjustment
.
Frequency
Slider control
Summary of Contents for CuratOR LX491W
Page 69: ......
