5
GB
Important! To prevent damage and the risk of
fire, electrocution or injury, please read and
observe the following safety instructions before
using the polishing machine.
1. Safety instructions
앬
Use the polishing machine only in a clean and dry
environment.
앬
The polishing machine should be placed on the
polishing surface before being switched on or off.
앬
Keep children away by taking the appropriate pre
cautions.
앬
Avoid switching on the machine inadvertently.
앬
Do not keep your finger on the switch when
carrying the connected polishing machine from
one place to another.
앬
Always unplug at the mains before changing the
polishing cap or carrying out repairs.
앬
Never carry or pull the machine by its power
cable.
앬
Protect the cable from heat, oil and sharp edges.
앬
Check the cable for breaks before each use.
앬
Do not exert too much pressure when polishing,
but simply allow the polishing machine to glide
over the polishing surface.
앬
Check the housing and switch for damage.
앬
Do not use the polishing machine if the housing or
switch is defective.
앬
the A-weighted equivalent continuous sound
pressure level at the userʼs ear lies below
70 dB(A).
앬
Repairs are to be carried out by qualified electrici-
ans only.
2. Maintenance and care
앬
Wash the polishing cap only by hand and hang up
to dry.
앬
When not in use, remove the polishing cap and
store the polishing machine upside down so that
the polishing pad can dry and retains its original
shape.
앬
The excessive use of wax and paste can cause
the polishing cap to jump off the polishing pad
while polishing.
앬
Use only a mild soap and damp cloth to clean the
polishing cap.
Important! Do not use any abrasive polishing
agents!
3. Care tips
앬
For optimum paintwork protection, you should
polish your car 2 to 3 times a year.
앬
Wash your car at least every 2 weeks. Avoid using
household detergents as these can damage the
paintwork and remove the layer of wax.
앬
Wash your car with a clean sponge, working from
top to bottom.
앬
Remove all insects, bird droppings and tar stains
from the paintwork daily.
앬
If you use any window-cleaning agents, spray
them onto a cloth and not directly onto the
windows in order to prevent them wetting the
paintwork.
4. Technical data
Voltage:
230V ~ 50 Hz
Power rating:
100 W
Speed:
3400 rpm
Polishing pad:
240 mm dia.
Weight:
2.3 kg
Sound pressure level at the
workplace L
PA
:
61,2 dB(A)
Weighted harmonic value a
hv
:
7,531 m/s
2
Totally insulated
쓑
5. Instructions for use
When using wax and polishes, please observe
the manufacturersʼ instructions.
Figure 1:
Pull the textile polishing cap over the polishing pad.
Make sure the polishing cap is completely clean.
Figure 2:
Spread the polishing paste evenly over the polishing
pad. Do not apply the polish directly to the polishing
surface.
Figure 3:
Switch the polishing machine on and off only when
the polishing machine is resting on the polishing sur-
face.
Anleitung APM 110_SPK7:Anleitung BPM 500_SPK1 14.06.2007 13:47 Uhr Seite 5
