_NV Ron 2000 4.2
16/37
3/25/2016
The set point is not triggered only when the scale senses a load whose
value is below the set point value.
In any other case, including when the scale is switched off, the set point
is triggered.
9.2 Units, user selectable (if included)
The Ron 2000 comes standard with one factory set unit of measurement. The following is
relevant only if the selectable units option was ordered.
Enter into the options menu by following the instructions in section 9.
Use the arrow keys ↑↓ to scroll through the available options until you see
UNITS
and press
ENTER
.
The current unit in use will be displayed. Use the arrow keys again and scroll
to the desired unit of measurement.
The available units are:
Lbs
K.NTON (Kilo Newtons)
DECA.N (Deca Newtons)
N.WTON (Newtons)
KG
M. TON (Metric tons)
S. TON (Short tons)
When the desired unit appears on the screen, press
ENTER
.
The display will flash
OK
, show the select unit, and then revert back to
options menu.
You may select another option or press
ESC
in order to exit from the options
menu.
9.3 Time - setting the real time clock (if included)
Enter into the options menu by following the instructions in section 9. Use the
arrow keys ↑↓ to scroll through the available option until you see
TIME
and
press
ENTER
.
The display will read
YEAR
. Press
ENTER
again and you will see
20:00
(meaning the year 2000) with the rightmost two digits blinking. Use the arrow
keys ↑↓ to select the current year and press
ENTER
.
