_NV Ron 2000 4.2
7/37
3/25/2016
8)
User-adjustable set points (1 or 2 Points).
9)
User-selectable baud rate.
10)
User-selectable units of measurement.
11)
Totalizer: stores/displays a total of selected loads.
12)
Data logger: stores up to 600 load measurements to be printed or
outputted.
13)
Data logger with extended memory capacity: for storing up to 3000,
6000, or 10,000 load measurements.
14)
Automatic Data Logger: repeatedly logs ongoing weight values. Up to
600, 3000, 6000, or 10,000 load measurements.
15)
Clock - real time clock: adds a date and time stamp to saved/outputted
measurements.
16)
Additional extension cable in 15ft/5m increments
17)
Longer extension cable in 15ft/5m increments
18)
Dampened (average) display for unstable load
19)
Indicator belt clip
20)
Rope falls multiplier, user selectable
21)
Wireless communication to additional display or PC
2. Operation
Basic operation of Ron systemsandhelpfultipsand tricks
B
efore operation, be sure the shackles you intend to use are appropriate for the
system (see shackle specification table). The indicator can connect directly to the
load cell via the short cable on the indicator or with an extension cable. Line up
the arrows of the connector plug on the cable and the connector socket on the
load cell and apply gentle pressure until locked. To disconnect, pull back the
outer ring on the plug, freeing the locking device. With the outer ring pulled
back, disconnect the plug and socket. Before use, ensure that the cable is not
kinked and can move freely without become snagged or caught during
operation. Press the
ON/OFF
key to turn the system on. The display will read
BATT
, then the percentage of remaining battery life followed by the unit of
measurement.
M. TON (Metric Tons)
S. TON (Short Tons, American tons, 2000 Lbs)
