28
3 operation
activate the new setting mode
NOtES
Using an io radio transmitter, some parame-
ters, such as sash priority, direction of rotation,
closing force, buzzer function, can be adjusted
subsequently in the reset mode.
• The drive returns to its initial state if no set
-
ting has been made within two minutes
since the last action or if the power supply
is interrupted. the settings will still be saved.
• For all new settings described in this chapter,
a new self-learning process must be carried
out after the adjustment has been made.
open the sashes halfway.
press and hold the open and close buttons
simultaneously for five seconds until the
product performs an open/close movement
and emits a beep.
beep
5 s
The new setting mode is now activated.
reverse sash priority
NOtES
this step is required if the arrangement of the
sashes is reversed.
the leading sash is the sash with the cover
strip.
1
1
2
2
if the correct sash is not set as the sash with
cover strip:
activate the new setting mode (see
page
28).
press and hold the and keys for 2 sec.
until two beeps sound and the sash with top
rail performs an up/down movement.
2× beep
2 s
The priority of the sashes is now reversed.
