15
2 installation instructions
Variant B
Reveal installation
position the installation profile with lateral
fastening brackets (dimension X + 5 mm) and
align it vertically and horizontally with a spirit
level; drill and attach.
X
5
spirit level
Fastening bracket
X = sash thickness in the reveal
CautION
Property damage caused by sliding of the
drive due to insufficient fastening
Use security bore hole!
2.3_B
security
bore hole
insert the electromechanical module into the
frame on the side where the power supply
enters.
insert the drive modules into the installation
profile, move them as far as they will go (limit
screw s1) and fasten them with the drive
screws.
NOtE
Do not screw the drive nuts too tightly!
For multiple-section sashes
Diagram 2L/2R, 3L/3R, 4
insert pivot bearings into the installation pro-
file when coupling multi-section sashes!
pivot bearing
