21
2 installation instructions
check dIrectIon of rotatIon and
prIorIty of the sashes
NOtES
the leading sash is the sash with the cover
strip.
Direction of rotation
press button
of the wireless wall trans-
mitter until the two axes rotate:
1
1
2
2
the direction of rotation is
correct
if the
turning movement of the axes corresponds
to the
opening direction
.
the direction of rotation is
not correct
and
must be changed if the turning movement
of the axes corresponds to the
closing di-
rection
.
Priority of the sashes
if the sash with cover strip opens before
the sash without cover strip and closes af-
ter it, the priority of the sashes is
correct
.
if the sash with cover strip opens after or
closes before the sash without cover strip,
the priority of the sashes is
not correct
and must be changed.
self-learnIng process
NOtES
the teach-in phase allows the configuration of
the drive according to its installation environ-
ment.
in this phase, each sash performs unsynchro-
nised opening and closing movements in the
set priority in order to find the optimal configu-
ration for the installation.
start self-learning process
to start the self-learning process, press
and hold the and buttons for a few sec-
onds until you hear a beep.
beep
a) positive feedback from the drive
at the end of the teach-in cycle, the drive has
determined a sensible setting of the folding
shutter.
two signal tones sound and the sash with
cover strip performs a short open/close move-
ment.
2× beep
