TC0123b
page 16 of 28
3PC TONNEAU COVER WITH SPORTS BAR & REMOTE LOCKING
21/05/08
33. Attach the Sports Bar front legs to the clamping plates and side rails using the 12Gx1½” self tapping screws, M6 spring washers
and washer plates as shown. Do not tighten yet. Repeat process for the Sports Bar rear legs.
See Dia #33
.
Diagram #33
34. Attach the Sports Bar front legs to the clamping plates using the M6x20mm screws and M6 spring washers as shown. Do not
tighten yet. Repeat process for the Sports Bar rear legs.
See Dia #34
.
Diagram #34
35. Tighten all the screws on the Sports Bar right hand leg in the order A - B - C - D - E - F. Tighten A, B, D & E to torque 12Nm. Tighten
C & F to torque 10Nm. Repeat process for the Sports Bar left hand leg. Visually check that all scews are home and all spring washers
are compressed.
See Dia #35
.
Diagram #35
CLAMPING
PLATE
M6 SPRING
WASHER
12Gx1½” SELF
TAPPING
SCREW
WASHER
PLATE
CLAMPING
PLATE
RIGHT HAND SHOWN
RIGHT HAND SHOWN
RIGHT HAND
FRONT LEG
RIGHT HAND
REAR LEG
M6 SPRING
WASHER
12Gx1½” SELF
TAPPING
SCREW
1
2
WASHER
PLATE
CLAMPING
PLATE
M6 SPRING
WASHER
M6x20 SCREW
M6x20 SCREW
WASHER
PLATE
CLAMPING
PLATE
RIGHT HAND SHOWN
RIGHT HAND SHOWN
M6 SPRING
WASHER
WASHER
PLATE
1
2
RIGHT HAND
FRONT LEG
RIGHT HAND
REAR LEG
TIGHTEN
TORQUE 12Nm
RIGHT HAND SHOWN
RIGHT HAND SHOWN
1
D
E
F
TIGHTEN
TORQUE 12Nm
TIGHTEN
TORQUE 10Nm
TIGHTEN
TORQUE 12Nm
C
A
B
2
RIGHT HAND
FRONT LEG
RIGHT HAND
REAR LEG
TIGHTEN
TORQUE 10Nm
TIGHTEN
TORQUE 12Nm
