18. Find the white 2-way connectors on the vehicle (directly behind the wheel arch) and unclip them from the vehicle as shown.
Disconnect the white 2-way connectors. Connect the white 2-way connectors on the wiring harness to the white 2-way connectors from
the vehicle as shown. Finally clip either of the white 2-way connectors back to where they were previously unclipped from the vehicle.
See Dia #18.
Diagram #18
2-WAY
CONNECTORS
(VEHICLE)
EARTH WIRE
TERMINAL
(VEHICLE)
EARTH WIRE
TERMINAL
(WIRING
HARNESS)
BOLT
BOLT
RE-ATTACH
BOLT
UNCLIP FROM
MOUNT
DISCONNECT
TC0123b
page 11 of 28
3PC TONNEAU COVER WITH SPORTS BAR & REMOTE LOCKING
21/05/08
19. Find the earth wire terminal behind the bedliner near the vehicle’s tailgate and remove the bolt holding the terminal together as
shown. Locate the earth wire from the wiring harness and locate it over the hole that the bolt was just removed from. While holding
everything in place, re-attach the bolt to the earth wire terminal on the vehicle as shown.
See Dia #19.
Diagram #19
20. Find the middle tie down bracket hole and push the spade terminal from the wiring harness through it as shown.
See Dia #20.
Diagram #20
1
1
2-WAY
CONNECTORS
(VEHICLE)
2-WAY
CONNECTORS
(VEHICLE)
2-WAY
CONNECTORS
(WIRING HARNESS)
CONNECT
CONNECT
2
3
3
REMOVE
BOLT
2
MIDDLE TIE DOWN BRACKET HOLE
PUSH SPADE TERMINAL THROUGH
HOLE IN BEDLINER
SPADE TERMINAL
(WIRING HARNESS)
