56-VOLT LITHIUM-ION HEDGE TRIMMER ATTACHMENT — PTX5100
7
EN
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
DESCRIPTION
KNOW YOUR HEDGE TRIMMER ATTACHMENT (Fig. A1)
1. Rear Bushing
2. Front Bushing
3. Motor Housing
4. Blade Sheath
5. Blade
PACKING LIST (A2)
ASSEMBLY
WARNING:
If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Always remove the battery pack from
the product when you are assembling parts, making
adjustments, cleaning, or when the product is not in use.
CUTTING HEAD ANGLE ADJUSTMENT
When the hedge trimmer attachment is taken out from the
package, it has been folded in its storage position (Fig. B).
The articulation angle and radial rotation of cutting head
can be adjusted independently. Adjust the cutting head to
a suitable working position before operation.
Articulation Angle Adjustment
There are six working positions. The angle of the cutting
blade can be adjusted from -68°to 42°(Fig. C).
1. Pull back the front bushing, and then firmly hold the
motor cover to rotate the cutting angle to the desired
position.
C-1 Front Bushing
C-2 Rear Bushing
2. Once the desired angle is reached, push forward the
bushing to lock the position of cutting head.
Radial Rotation Adjustment
There are two vertical cutting positions (Fig. D). It can be
adjusted to the left or right 90°.
1. Pull back the rear bushing, and then firmly hold
the motor cover to rotate the blade to the desired
position.
2. Once the desired angle is reached, push forward the
bushing to lock the position of cutting head.
WARNING:
To reduce the risk of injury, remove
the battery before making adjustments and make
adjustments only when the blades are at a standstill.
Never touch the blades while making adjustments.
WARNING:
The casting alloy gear case is hot. Never
touch the casting alloy gear case surface without wearing
a PPE gloves.
CONNECTING/REMOVING THE HEDGE TRIMMER
ATTACHMENT TO THE TELESCOPIC POWER POLE (FIG.E)
This hedge trimmer attachment is designed for use with
EGO telescopic power pole PPX1000.
See
“INSTALLING AN ATTACHMENT TO THE
TELESCOPIC POWER POLE”
section in the telescopic
power pole PPX1000 operator’s manual for connecting the
hedge trimmer to the power pole.
See
“REMOVING THE ATTACHMENT FROM THE
TELESCOPIC POWER POLE”
section in the telescopic
power pole PPX1000 operator’s manual to remove the
hedge trimmer from the power pole.
MOUNTING THE TIP PROTECTOR (Optional)
1. Use a hex wrench (not included) to remove the short
bolt, plain washer, bush and nut at the end of the
cutting blade Save the plain washer, bush and nut for
reassembly (Fig. F).
F-1 Nut
F-3
Plain Washer
F-2 Bush
F-4
Short Bolt
2. Align the tip protector with the bulge on the cutting
blade and mount it into place. Secure it with the new
long bolt and nut as well as the saved washer, bush
and nut (Fig. G).
G-1 Nut
G-4
Bush
G-2 Tip Protector
G-5
Plain Washer
G-3 Nut
G-6
Long Bolt
OPERATION
DANGER:
Never cut near power lines, electric
cords, or other electric sources. If the cutting blades
jam on any electrical cord or line,
DO NOT TOUCH THE
BLADE OR THE ALUMINUM POLE! THEY CAN BECOME
ELECTRICALLY LIVE AND MAY BE VERY DANGEROUS.
Continue to hold the hedge trimmer attachment by the
insulated handle or lay it down and away from you in a safe
manner. Disconnect the electrical service to the damaged
Summary of Contents for POWER+ PTX5100
