Egcon GCU-DG3, User Manual

Page: 22 / 25

GCU -DG3 User's Guide
EGCON Co,. Ltd
22 Page
16.12. Relay Output Set
NO. Menu Setting Scope Default
1. RO1 Output setting of indication relay for actual state 63QX
2. RO2 Output setting of indication relay for actual state 26WX
3. RO3 Output setting of indication relay for actual state 12X
4. RO4 Output setting of indication relay for actual state 48X
5. RO5 Output setting of indication relay for actual state 59X
6. RO6 Output setting of indication relay for actual state 27GX
7. RO7 Output setting of indication relay for actual state 51X
8. RO8 Output setting of indication relay for actual state 51GX
-
Setting lists and explanations
NO. Indication Explanation Other
63QX Operation in fault of low oil
26WX Operation in fault of over temperature
12X Operation in fault of overspeed
48X Operation in fault of automatic mode start
59X Operation in fault of overvoltage
27GX Operation in fault of low voltage `
51X Operation in fault of over current
51GX Operation in fault of over current
88X Operation in starting output
5X Operation in pausing output
5EX Operation in fault of emergency pause
51CX Operation in blocking input
51TX Operation in blocking input
23X Operation in preheating output
AFX Operation in preliminary fault input
27C Operation in normal commercial electricity
84G Operation in normal generating power supply
86X Operation in fault output of generator
14X Operation in above IDLE SPEED of generator
13X Operation in above SYNCHRO SPEED of generator
L-M Operation when movement is manual mode.
L-A Operation when movement is automatic mode.
R-M Operation when remote control is manual mode.
R-A Operation when remote control is automatic mode.
OFF Operation when movement mode is OFF.