Data Interface and Optional Accessories
Page 93
8.2.2
SIO / Plain text
Following commands are available in the clear text protocol:
Command
Description
?
Display command overview.
BATTERY
Select battery type
BATTERYPROTECTION Control battery protection
BUTTON
Software control of device
CARTRIDGE
Set/view connected fuel cartridges/DuoCartSwitch
CONFIG
Set customized operation parameters
DEFAULT
Apply default operation parameters
ERROR
Show ten most recent errors
FEULGAUGE
Enable/disable fuel gauge
GET
Get customized operation parameter
HYBRID
Switch the device from automatic into hybrid mode for 15s
LANGUAGE
Set language in Operating panel OP2
LIMITS
Show min. and max. values of operation parameters
LOCKED
Lock control contacts
LOG
Show details of current operation state
MODBUS
Settings of MODBUS protocol
REMOTE
Remote control via software interface
RESET
Restart the device
SERIAL
Show the device's serial numbers
SET
Set customized operation parameter
SFC
Show current operation state
STDVALUE
Show default values of operation parameters
SYSTEM
Reason for last start-up and stop
VALUE
Show current values of operation parameters
VER
Show version of firmware
A detailed description is available in the user manual for the interface
adapter.
