Operation
Page 63
5.5.4
External control
The EFOY Pro fuel cell can also be controlled externally. In that case, the
automatic charge control mechanism will be partly or totally deactivated.
For an external control the operation mode "External control" must be en-
abled.
1.
Press
on the operating panel, or select
"Operating mode" in the main menu. The op-
erating mode selection appears.
2.
Select the "External control on" operating
mode.
3.
Press
[ok]
to confirm your selection.
An open padlock is displayed at the bottom right of
the display.
If the controller now receives an external signal,
e.g. on Pin 7 (Data Inferface), "RC" (Remote Con-
trol) is displayed at the bottom right of the display.
INFO:
If you have not enabled external control, a
closed padlock is displayed at the bottom
right of the display when an external signal
is being received.
CAUTION!
Incorrectly set operating parameters may damage the device. This may
nullify your warranty.
Only use the precise values permitted for the battery parameters and
battery protection settings.
