Efiamma Good 10 C, Use And Maintenance Manual

Page: 54 / 156

GOOD 10 C- GOOD 12 C
Use and maintenance manual
Page 54
Rev.0 01/03/2019
EN
Impostare con i tasti P5 e P4 la temperatura ambiente desiderata per il
PROGRAM 1.
SUNDAY THE STOVE WILL NOT TURN ON
Confirm by pressing P6 to go to the next screen.
At this point, select power for PROG - 1.
After selecting the power it is possible to choose room temperature to be reached in that room, independently from the temperature set for
room temperature during manual operation. As soon at room temperature reaches the set value, the stove goes into MODULA or Comfort
CLIMA mode (if activated).
Use the P5 and P4 keys to set the desired power for PROGRAM 1.
NB: Stove operation in COMFORT CLIMA (climate) mode may start the start-up and shut-down phase multiple times throughout the
day; this may compromise duration of the resistance used for automatic stove start-up.
! IMPORTANT
USING THIS MODE IT IS NECESSARY TO MAKE SURE THAT AFTER EACH AUTOMATIC
START-UP THE BRAZIER ALWAYS REMAINS CLEAN IN ORDER TO GUARANTEE A CORRECT
AUTOMATIC START-UP. THE COMFORT CLIMA MODE ALSO WORKS WITH AN EXTERNAL
THERMOSTAT CONNECTED.
Description of symbols and signals of the display
Symbols
CLOCK
WORK POWER
STOVE STATE
ROOM TEMPERATURE
Description of functions
Modifies work power
To modify work power, press the P1-2 key to enter the specific menu and use P5 and P4 keys to adjust desired power from 1 to
5. Increasing power increases pellet consumption and the speed of the exchanger fan. It is not possible to modify power set in the
LAVORO MODULA (Modulate work) phase.
Modulation
During the work phase, the purpose of the stove is to reach the set room temperature; when the set is satisfied, the stove switches
to LAVORO MODULA (Modulate work) mode, the phase where fuel consumption is minimum and the room fan works at minimum
power.
OFF 7
PROG - 1
DOMENICA
P - 4
PROG - 1
POTENZA
23 °C
PROG - 1
SET TAMB
20°C P-1
LAVORO
10:35