3-18
3
Service Procedures
T
O
REMOVE
AND
INSTALL
THE
FACEPLATE
1.
Remove the eight screws that attach the faceplate to the Fiery X3e board (these screws
are located on the board side of the faceplate). Set aside the screws.
2.
Remove the two screws on the front of the faceplate that attach the parallel port
connector to the faceplate. Set aside the screws.
3.
Gently remove the faceplate from the Fiery X3e board. Set aside the faceplate.
4.
To install the faceplate, position it so that the cutouts fit over the connectors on the
Fiery X3e board.
5.
Insert the eight screws you removed earlier into the mounting holes on the board side of
the faceplate.
6.
Insert the two screws on the front of the faceplate that attach the parallel port
connector to the faceplate.
