27
Installation and Service Guide
Installing Hardware
5
Set the switch on the printer interface board to the ON position.
Figure 9:
USB connection between printer and E-35A
6
Power on the printer.
The E-35A automatically starts up.
To disable the power synchronization
1
Turn off the printer using the main power switch.
Wait until the E-35A shuts down.
2
Make sure that the power switch on the connector panel of the E-35A is OFF position (|).
3
Set the switch on the printer interface board to the OFF position.
Important:
Do not change the switch position when the E-35A is powered on.
A
printer connector panel
B
E-35A connector panel
1
Type A USB ports
3
Type B USB port on the printer interface board
2
USB cable
4
Power synchronization OFF/ON switch on the printer
interface board. Default position is ON.
ON: Right
OFF: Left
Important:
Do not change the switch position when the E-35A is powered on.
A
B
4
2
1
3
