21
Installation and Service Guide
Installing Hardware
(Optional)
Connecting the monitor, keyboard, mouse, and power
Before using the E-35A, connect the monitor, keyboard, mouse, and power to the E-35A if applicable. The Fiery NX
station is an option.
To connect the monitor, keyboard and mouse.
Note:
For information about the monitor, keyboard, and mouse, see the documentation that accompanies those
products.
1
Make sure that the E-35A is installed in the furniture and the monitor is securely attached to the top of the E-35A.
For more information, see the assembly instructions that accompany the furniture.
2
Connect the monitor cable to the Display port on the connector panel.
3
Connect the monitor power cable to an outlet of the power strip inside the furniture or an outlet power on the wall.
4
Place the keyboard and mouse on the furniture table top.
5
Connect the wireless adapter for the keyboard and mouse to one of the USB port.
Use the USB ports that is attached at the front of the furniture.
6
Power on the mouse by using the power switch on the bottom side of the mouse.
7
Connect the recessed end of the E-35A power cable to the power connector on the power strip inside the furniture.
Be sure to use the appropriate power cable for your regional outlet type.
Connecting to the printer and the network
Connect the E-35A to the printer and the network to enable print and network connectivity.
To connect to the printer
1
Make sure that the E-35A and the printer are powered off.
Important:
Make sure that the OFF/ON switch on the printer interface board is set to OFF position.
