Efco SmartSL, User Manual

Page: 63 / 70

SmartSL User Manual
56
Feature Options Description
Channel selection
Auto
Select the number of channels - Auto = dual-
channel
Single
Dual
Channel selection Bit 3:0
0 - F, default is
2
NOTE: Only bits [3:1] are used for final channel
select value. BMISC Channel Select Bits 3:0:
Specifies the address bits to use to stripe
memory across multiple PMI channels.
Channel selection 4
0 - F, default is
1
BMISC Channel Select 4 for channel hashing.
Bank Address Hashing
Disabled
Enable or disable Bank Address Hashing
Enabled
Rank Select Interleaving
Disabled
Enable or disable Rank Select Interleaving
Enabled
Dynamic Self Refresh
Disabled
Enable or disable PUNIT driven DUNIT DDR
dynamic self refresh
Enabled
DRAM PM5
Disabled
Enable or disable DRAM PM5 PUNIT
configuration
Enabled
DDR3 2N Mode
Disabled
Set the DDR3 mode to 2N. 1N mode is used
by default.
Enabled
RX Power Training
Enabled Enable/Disable RX Power Training
Disabled
TX Power Training
Enabled Enable/Disable TX Power Training
Disabled
MRC Fast Boot
Enabled
Enable/Disable MRC fast boot. Forces MRC
training to occur when disabled.
Disabled
Scrambler
Enabled
Enable/Disable Scrambler
Disabled
DRP Lock
Disabled
DRP Lock
Enabled
REUT Lock
Disabled
REUT Lock
Enabled
RH Prevention
Disabled
Prevents Row Hammer attacks by increasing
the average time between sending REF
commands to DRAM.
Enabled
6.5.2 Platform Controller Hub (PCH) Submenu
Feature Options Description
Security Configuration Submenu Security Configuration settings.
Azalia Configuration Submenu Azalia HD Audio Options
USB Configuration Submenu USB Configuration settings
PCI Express Configuration Submenu PCI Express Configuration settings
Serial IRQ Mode Quiet Configure serial IR mode.