SmartSL User Manual
13
3.2.4 Gigabit Ethernet Port
The SmartSL offers two Gigabit Ethernet (GbE) ports that use Intel
®
i210 Gigabit
Ethernet controllers. The GbE ports are located on the front panel and will support
Wake-on-LAN function. When you plug in the Ethernet cable, you will see the Ethernet
status and speed from the LED indicators on the RJ45 connector as follows:
1000 Base-T uses all pairs for bidirectional traffic in the RJ45 connector.
Recommended cables to be used are the Category 5e (enhanced).
PIN
Name
Description
1
BI_DA+
Bi-directional pair A +
2
BI_DA-
Bi-directional pair A -
3
BI_DB+
Bi-directional pair B +
4
BI_DC+
Bi-directional pair C +
5
BI_DC-
Bi-directional pair C -
6
BI_DB-
Bi-directional pair B -
7
BI_DD+
Bi-directional pair D +
8
BI_DD-
Bi-directional pair D -
Active/Link LED
LED Color Status
Description
Yellow
OFF
The Ethernet port is disconnected.
ON
Ethernet port is connected with no data transmission
Blinking Ethernet port is connected, and data is transmitting/receiving
Speed LED
LED Color
Status
Description
Green
Or
Orange
OFF
10Mbps
Green
100Mbps
Orange
1000Mbps
To utilize the GbE port in Windows, you will need to install the corresponding driver for
the Intel® i210 GbE controller.
Summary of Contents for SmartSL
