Efco SmartSL, User Manual

Page: 56 / 70

SmartSL User Manual
49
6.4.21 UEFI Network Stack Submenu
Feature Options Description
UEFI Network Stack Disabled Enable or disable the UEFI network stack.
Enabled
IPv4 PXE Support Disabled
Enable IPv4 PXE boot support. If disabled IPv4 PXE
boot option will not be created.
Enabled
IPv6 PXE Support Disabled
Enable IPv6 PXE boot support. If disabled IPv6 PXE
boot option will not be created.
Enabled
PXE boot wait time 0 Wait time to press ESC key to abort the PXE boot
Media detect count 1
Number of times the presence of media will is to be
checked
6.4.22
CSM & Option ROM Control Submenu
Feature Options Description
CSM Support
Disabled Enable/Disable CSM Support.
Enabled
CSM16 Module
Version
No option BIOS CSM module version
Gate A20 Active
Upon Request
Upon Request: Gate A20 can be disabled using
BIOS services.
Always
Always: Do not allow disabling Gate A20. This
option is useful when any runtime code is executed
above 1MB.
Option ROM
Messages
Force BIOS Set display mode for option ROMs.
Keep Current
INT19 Trap
Response
Immediate
BIOS reaction on INT19 trapping by Option ROM:
IMMEDIATE - execute the trap right away.
POSTPONED - execute the trap during legacy boot.
Postponed
Boot Option Filter
UEFI and Legacy
Controls which devices/boot loaders the system
should boot to.
Legacy only
UEFI only
PXE Option ROM
Launch
Policy
Do not launch
Controls the execution of UEFI and Legacy PXE
option ROMs.
UEFI ROM Only
Legacy ROM Only
Storage Option
ROM Launch
Policy
Do not launch
Controls the execution of UEFI and legacy mass
storage device option ROMs.
UEFI ROM Only
Legacy ROM Only
Video Option
ROM Launch
Policy
Do not launch
Controls the execution of UEFI and legacy video
option ROMs.
UEFI ROM Only
Legacy ROM Only
Other Option
ROM Launch
Policy Do not launch Controls the execution of option ROMs for PCI / PCI
Express devices other than network, mass storage,
or video.
UEFI ROM Only
Legacy ROM Only