Efco SmartSL, User Manual

Page: 62 / 70

SmartSL User Manual
55
6.5.1.2 Graphics Power Management Control Submenu
Feature Options Description
RC6(Render Standby)
Enabled
Check to enable render standby support.
Disabled
Power Meter Lock
Enabled
Enable/Disable Power Meter Lock.
Disabled
6.5.1.3 Memory Configuration Options Submenu
Feature Options Description
Rank Margin Tool EV
Mode
Disabled
Enable/Disable Rank Margin Tool print out
message support.
Please make sure MRS Debug Message Level
at least minimum
Enabled
DDR DVFS Disabled
Enable or disable DDR Dynamic Voltage and
Frequency Scaling in MRC
Enabled
Memory Frequency
Override
Disabled
Allows override of memory frequency
parameters that are automatically obtained
from DDR3 DIMM SPD. May cause memory
instability if the selected frequency is not
supported by the memory device. This option
does not affect systems configured without
'UseDimmSpd' option
Enabled
Frequency A Selection
Auto
Frequency A Selection
800
1067
1600
800(SKU333)
1000(SKU333)
1333(SKU333)
900(SKU360)
1800(SKU360)
933(SKU373)
1866(SKU373)
Frequency B Selection
Auto
Option to Select Frequency B (Min DDR DVFS
Frequency)
1067
800(SKU333)
1000(SKU333)
900(SKU360)
933(SKU373)
Auto Detect LPDDR3
DRAM
Disabled
Enable or disable automatic detection of
LPDDR3 DRAM parameters
Enabled
LPDDR3 Chip Select
1 Rank
LPDDR3 Chip Select (Number of Rank)
Configuration.
2 Ranks
Auto Detect must be disabled to use this
option.