Efco SmartSL, User Manual

Page: 3 / 70

SmartSL User Manual
ii
Copyright
Copyright © 2020 EFCO Technology. All rights are reserved. EFCO reserves
the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of EFCO.
Information provided in this manual is intended to be accurate and reliable.
However, EFCO assumes no responsibility for its use, nor for any
infringements of the rights of third parties, which may result from its use.
The material in this document is for product information only and is subject to
change without notice. While reasonable efforts have been made in the
preparation of this document to assure its accuracy, EFCO assumes no
liabilities resulting from errors or omissions in this document or the use of the
information contained herein.
EFCO reserves the right to make changes in the product design without
notice.
Acknowledgments
All brand names and/or trademarks are the properties and registered brands
of their respective owners.
For more information about this and other EFCO products, please visit our
website at
www.efcotec.com .
Declaration of Conformity
FCC
This equipment has been tested and found to comply with the limits for a
Class A digital device, according to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
CE
The product(s) described in this manual complies with all applicable European
Union (CE) directives if it has a CE marking. For computer systems to remain
CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.