E F A P O W E R E V - H C - I N S T A L L A T I O N A N D U S E R M A N U A L
24 | 28
7.2.2
OPERATION SEQUENCES (FOR EV-HC WITH AUTHENTICATION)
For an
EV
-
HC
with
authentication
, the
operation sequences are slightly different
. Nevertheless, the lights have
the same meaning.
The
green
light
stands for a charging station
ready
to
charge
. In the
following
figure
is represented the
sequence
to
start
charging
.
The
blue
light
indicates that the
station
is
charging
.
At this stage, only the
same
authentication
ID
, used to start the charge,
will
be
able
to
stop
charging
. There are
two ways to stop charging: starting with authentication or by disconnecting the cable from the car. In the
following figure are the sequences for each method.
NOTE: If the user
left the station charging
and
when
returned light
is
blinking blue or
red
, the user has to
authenticate itself
and the
led
should turn
green unlocking
the
cable
to
be disconnected
.
If the led
turns/remains red
, please refer to the
chapter 8.2.
Figure 29 - EV-HC from Ready to Charge sequence (with authentication)
Figure 30 - EV-HC from Charge to Ready sequence (with authentication)
Card ID that started the
charging session
Card ID that started the
charging session**
Disconnect from the car
Different Card ID
Stop charging
Stop charging
Continue charging
Disconnect from the EV-HC
**If the EV-HC has its own
charging cable, from red light
goes directly to green (ready to
use).
