Phone Paging
To make a phone page in the “FIRE AREA”:
1. Establish two-way communications with the phone station which
will make the page.
2. Press the Fire Area Phone switch. The LED will light. The phone
risers are now connected to the Fire Area (channel 1) pre-amp
output.
3. Any active phone station on either phone riser may make an
announcement to the Fire Area. The FCCA-4/6 master handset may
be used to monitor this announcement. The page message will
automatically override any tone/tape message being broadcast.
To make a phone page in the "Other Areas":
1. Establish two-way communications with the phone station which
will make the page.
2. Press the Other Areas "Phone" switch. The Other Areas Phone LED
will light. The phone risers are now connected to the Other Areas
(channel 2) pre-amp output.
3. Any active phone station on either phone riser may make an
announcement to the selected areas. The FCCA-4/6 master handset
may be used to monitor this announcement. The page message will
automatically override any tone/tape message being broadcast.
To make an ALL CALL phone page:
1. Establish two-way communications with the phone station which
will make the page.
2. Press the Fire Area and Other Areas "Phone" switches. The Phone
LED’s will light. The phone risers are now connected to the Fire
Area (channel 1) and the Other Areas (channel 2) pre-amplifier
outputs.
3. Any active phone station on either phone riser may make an
announcement to all areas. The FCCA-4/6 master handset may be
used to monitor this announcement. The page message will
automatically override any tone/tape message being broadcast.
Tape Message
To broadcast the pre-recorded message:
1. Press the appropriate Tape switch. The respective Tape LED lights.
The Aux Input (tape) is now connected to its respective pre-amp
output, and activated.
Note:
MIC or Phone Page will override the tape message.
FCCA Series Manual
29
firealarmresources.com
