manualshive.com logo in svg

EDWARDS SYSTEMS TECHNOLOGY FCCA Series, Installation Manual

Share
Download
EDWARDS SYSTEMS TECHNOLOGY FCCA Series Installation Manual Download Page 32

Switches for Channel Selections 

Each switch has an LED which illuminates when the switch is 
activated. 

Fire Area (#1) - Channel A (Panel Address 41, channel 1 - PCB A): 

Phone Page  Directs audio from incoming telephone circuit to fire 

area (channel A) speakers. LED indicates switch active. 

MIC Page 

Directs audio from microphone to the fire area (channel 
A) speakers. LED indicates switch active. 

Fire Tone 

Directs alarm tone to the fire area (channel A) speakers. 
LED indicates switch active. 

Fire Tape 

Directs pre-recorded message to the fire area (channel 
A) speakers. LED indicates switch active. 

Area #2 - Channel B (panel Address 41, channel 2 - PCB A): 

Phone Page  Directs audio from incoming telephone circuit to the 

area #2 (channel B) speakers. LED indicates switch 
active. 

MIC Page 

Directs audio from microphone to the area #2 (channel 
B) speakers. LED indicates switch active. 

Fire Tone 

Directs alert tone to the area #2 (channel B) speakers. 
LED indicates switch active. 

Fire Tape 

Directs pre-recorded message to the area #2 (channel B) 
speakers. LED indicates switch active. 

Area #3 - Channel C (Panel Address 42, channel 1 - PCB B): 

Phone Page  Directs audio incoming telephone circuit to area #3 

(channel C) speakers. LED indicates switch active. 

MIC Page 

Directs audio from microphone to area #3 (channel C) 
speakers. LED indicates switch active. 

Area #4 - Channel D (Panel Address 42, channel 2 - PCB B) 

Phone Page  Directs audio from incoming telephone circuit to area #4 

(channel D) speakers. LED indicates switch active. 

MIC Page 

Directs audio from microphone to area #4 (channel D) 
speakers. LED indicates switch active. 

Area #5 - Channel E (Panel Address 43, channel 1 - PCB C): 

Phone Page  Directs audio from incoming telephone circuit to area #5 

(channel E) speakers. LED indicates switch active. 

MIC Page 

Directs audio from microphone to area #5 (channel E) 
speakers. LED indicates switch active. 

Area #6 - Channel F (Panel Address 43, channel 2 - PCB C): 

Phone Page  Directs audio from incoming telephone circuit to area #6 

(channel F) speakers. LED indicates switch active. 

26 

 

FCCA Series Manual 

firealarmresources.com

Summary of Contents for FCCA Series









































Reviews:

No comments

Brands by name

Popular brands

Load more brands