EDMUNDS TRENDSETTER™
2.1 ELECTRONIC GAGING
2-1.1 Preparing For Use - Electronic Gaging
This opening description will be as brief as possible in an effort to minimize setup time. A more
complete description of the column and it’s modules will be found later in the manual. To form a
firm three point support for the column, unscrew the front screw at the bottom of the long foot and
remount the foot on the front screw. The foot should be perpendicular to the column. This foot
will also serve as a connector for multiple column setups.
With the power switch off, plug in one or two gage probes into the A & B input sockets located in
the rear of the column. Next, plug in the 100-240 VAC/50-60 Hz supply to the back of the column.
4
