Edirol UR-80, Owner'S Manual, Page: 57 / 396

Español
Italiano
Français
Deutsch
English
57
Recording audio
This chapter explains various ways in which you can connect and use the UR-80.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
Basic use
You can connect headphones and/or monitor speakers as shown in the diagram, and monitor the
playback of your application, or the sound of instruments or audio devices connected to the UR-80.
fig.basic.e
USB cable
Computer
USB
Headphones
Monitor speakers
AC adaptor
DC IN
This adjusts the volume that is output from
the headphone jack and the Monitor speakers.
Using the sampling frequency
• You must set the UR-80’s sampling frequency select switch to match the sampling
frequency used by your application.
• If the
sampling frequency select switch
is set to
96 kHz REC
, you will not hear the
sound that is played back by your application.
• If the sampling frequency select switch is set to 96 kHz PLAY , the sound of instruments
or audio devices connected to the UR-80 cannot be recorded by your application.
• In order for the
sampling frequency select switch
setting to take effect, you switch off
the UR-80, then turn it on again.