Edirol UR-80, Owner'S Manual, Page: 44 / 396

44
Controlling your software
■
Functions assigned to the controllers
Please affix the Logic labels to the included template sheet. The explanation below will follow these settings.
Track Control section
Track faders
These adjust the level of each channel.
By switching the fader bank you can adjust the level of all channels.
* Use the
FADER BANK
function buttons to switch fader banks.
Master fader
Control the master volume of Audio Mixer.
Track Status buttons (TRACK STATUS/HQ PART)
These buttons switch the status of each channel.
By switching the fader bank you can control the status of all channels.
* Use the
FADER BANK
function buttons to switch fader banks.
Track control knobs (TRACK/HQ CONTROL)
These knobs function as encoders.
The value will increase while the track control knob is turned toward the right, and will decrease
while the knob is turned toward the left. The change (increase/decrease) will stop when you return
the knob to the center position.
Use the
ASSIGNMENT
function button to switch the parameters that are controlled by these knobs.
Automation button (AUTOMATION)
This switches the automation mode of the currently selected channel.
Mode SELECT button status Function
MUTE OFF Switch channel mute on/off. On: lit Off: unlit
SOLO GREEN Switch channel solo on/off. On: lit Off: unlit
REC/RDY RED Switch channel record-ready on/off. On: lit Off: unlit
SELECT ORANGE Select the channel to which an operation for an individual channel will apply.
Selected: lit Not selected: unlit
AUTOMATION button status Operable channel/track
READ Switch the automation mode to READ
WRITE Switch the automation mode to WRITE
TOUCH Switch the automation mode to TOUCH
LATCH Switch the automation mode to LATCH