User's Manual
The Current Tree and Current Context settings cannot be changed
within the INSTALL program. If you need to change the tree or
context where the PrintSir will be installed, use the CX command
to change them before starting INSTALL program.
6.
The quick installation program will not only set up the PrintSir, but
create and setup all required objects on the network. When the
setup is complete, it will also display an execution command as
following that you can run after logging in to the file server to
redirect print commands to the new PrintSir.
7.
Reset the PrintSir to have the changes take effect.
NOTE: The PrintSir may require up to a minute after power-up to log
into a NetWare Directory Services context because of the large
number of calculations NDS security requires.
5.3.2
NetWare 4.x/5.x Installation Using PSETUP
5.3.2.1
Configuring as Print Server Mode
For more complex setup needs, you can use the PSETUP program in
conjunction with the NetWare PCONSOLE program.
To install the PrintSir using NetWare Directory Services (NDS)
mode,
1.
Log in to your NetWare server as ADMIN.
2.
Run the PSETUP program included on the PrintSir CD-ROM. (ex.
e:\dosutil\psetup.exe)
3.
Select your new PrintSir from the list provided.
4.
Choose
NetWare Configuration
from the menu.
5.
Select
Print server
in the Printing mode field.
6.
Change
Alias name
if you want.
