User's Manual
23.
Press
Insert
and add your newly created print queue to the list
of queues serviced by the printer. Enter a priority number for
the queue service, or press Enter to accept the default.
24.
Repeatedly press Escape to exit the PCONSOLE program.
25.
Reset the PrintSir to have the changes take effect.
N O T E :
I f t h e P r i n t S i r y o u h a v e i s w i t h m u l t i p l e p r i n t e r
connectors, you may create multiple print queues and printer objects.
Your PrintSir should now be ready to use. You should be able to
redirect printing to your PrintSir using a CAPTURE command such as
the one shown in the previous section.
5.2.2.2
Configuring as Remote Printer Mode
This remote printer feature is not available for the 10/100Mbps 3-
port PrintSir models. Make sure that you have created the NetWare
print server with Type Remote using PCONSOLE utility before you
c o n f i g u r e t h e P r i n t S i r . F o r m o r e d e t a i l e d i n f o r m a t i o n a b o u t
PCONSOLE, please refer to NetWare’s manual. You can set up the
NetWare print server and print queue objects by following the steps
below:
1.
Run the NetWare PCONSOLE program.
2.
Change the current file server, if necessary, using the
Change
Current File Server
menu selection.
