User's Manual
2.
Hardware Installation
1.
Unpack the print server package and check all the items listed in section 1.3.
2.
Connect the print server to the printer you want to share on the network
z
For direct attach models, plug the print server directly to the printer’s
centronics port.
z
For palmtop/desktop models, connect the printer to print server by the
standard printer cable.
3.
Connect the power adapter to the print server.
4.
The print server will perform the Power-On-Self-Test (POST) after it is
powered on. The Status LED will flash 6 times to indicate that the print
server is ready.
NOTE1: MUST use the power adapter shipped with the print server, do NOT use any other
power adapter from any sources.
NOTE2: To prevent the compatibility problem between PrintSir and a few printers, it is
recommend that you power on the PrintSir before the printer.
