User's Manual
6.3
Setup PrintSir’s IP Address
The PrintSir must have a unique IP address in order to be recognized
by the network.
You can set up the IP address on the various Unix systems using any
one of the following methods:
1.
ARP & Ping Assignment (Recommend for Unix)
2.
DHCP (Dynamic Host Configuration Protocol)
3.
BOOTP (Bootstrap Protocol)
4.
RARP (Reverse Address Resolution Protocol)
The PrintSir will use the last three methods to obtain its IP address
automatically if its IP address is configured as Auto (0.0.0.0).
6.3.1
ARP & Ping Assignment
You can use ARP and Ping commands with a web browser to
complete PrintSir’s IP address setting.
Parameters for the commands are as follows:
arp
–
s <IP Address> <Ethernet ID>
ping <IP Address>
For example, a PrintSir with the following configuration:
Node ID: 0000B4010101
( t h e N o d e I D i s p r i n t e d o n t h e r e a r s i d e o f t h e
PrintSir)
Assign IP address: 203.66.191.12
arp
–
s 203.66.191.12 00-00-B4-01-01-01
