Edimax Office 1-2-3 User Manual Download Page 74

Page: 74 / 269

Office 1-2-3 Interface

Each Managed AP has “

Action

” icons with the following functions:

Disallow

Remove the Managed AP from the AP array and disable connectivity.

Edit

Edit various settings for the Managed AP (see

Edit

below).

Blink LED

The Managed AP’s LED will flash temporarily to help identify & locate
access points.

Buzzer

The Managed AP’s buzzer will sound temporarily to help identify & locate
access points.

Network Connectivity

Go to the “Network Connectivity” panel to perform a ping or traceroute.

Restart

Restarts the Managed AP.

Summary of Contents for Office 1-2-3














































































































































































































































































Search results

Summary of Contents for Office 1-2-3

Reviews:

Related manuals for Office 1-2-3

Brands by name

Popular brands

Edimax Office 1-2-3, User Manual

Search results

Summary of Contents for Office 1-2-3

Reviews:

Related manuals for Office 1-2-3

Brands by name

Popular brands