Edimax Office 1-2-3, User Manual

Page: 144 / 269

Office 1-2-3 Interface
144
VII-2-2 Control
The Control section will change according to the selection in the Menu
section.
Map Location Select a pre-defined location from the drop down menu.
When you upload a location image in
NMS Settings

Zone
Edit , it will be available for selection here.
AP Group You can select an AP Group to display in the zone map. Edit
AP Groups in
NMS Settings

Access Point.
Search Use the search box to quickly locate an AP.
Radio Use the checkboxes to display APs according to 2.4GHz or
5GHz wireless radio frequency.
Signal When Radio Coverage is selected in Menu, signal strength is
shown in the Control section below the “Radio” option.
Signal strength chart displays the signal strength in dBm,
and is also shown around each AP in the zone map.
Channel When Channel is selected in Menu, channel is shown in the
Control section below the “Radio” option.
Client Numbers When Client Numbers is selected in Menu, client numbers is
shown in the Control section below the “Radio” option.
AP Loading When AP Loading is selected in Menu, AP loading is shown
in the Control section below the “Search” option. Two
options are available: “CPU” or “Traffic (Tx + Rx)”.
CPU Loading This shows the CPU loading of the AP.
Traffic (Tx + Rx) This shows the Traffic (Tx+Rx) loading.
Zoom Use the slider to adjust the zoom level of the map.
Transparency Use the slider to adjust the transparency of location images.
Scale Zone map scale.
Device/Number Displays number and type of devices in the zone map.