Edimax Office 1-2-3 User Manual Download Page 136

Page: 136 / 269

Office 1-2-3 Interface

136

Network Connectivity

Go to the “Network Connectivity” panel to perform a ping or traceroute.

Restart

Restarts the Managed AP.

Status Icons

Icon

Color

Status

Definition

Grey Disconnected

Managed AP is disconnected.

Please check

the network connection and ensure the
Managed AP is in the same IP subnet as the
Master AP.

Red

Authentication
Failed

Or

Incompatible
NMS Version

System security must be the same for all
access points in the AP array.

Please check

security settings

All access points must have the same
firmware version.

Please use the Master

AP’s firmware upgrade function

Orange

Configuring or
Upgrading

Please wait while the Managed AP makes
configurations or while the firmware is
upgrading.

Yellow Connecting

Please wait while Managed AP is
connecting.

Green Connected

Managed AP is connected.

Blue

Waiting for
Approval

Managed AP is waiting for approval.

Note:

Up to sixteen Managed APs are supported.
Additional APs will have this status until an
existing Managed AP is removed.

Summary of Contents for Office 1-2-3














































































































































































































































































Search results

Summary of Contents for Office 1-2-3

Reviews:

Related manuals for Office 1-2-3

Brands by name

Popular brands

Edimax Office 1-2-3, User Manual

Search results

Summary of Contents for Office 1-2-3

Reviews:

Related manuals for Office 1-2-3

Brands by name

Popular brands