Edimax IC-7100 User Manual Download Page 84

Page: 84 / 172

2.7 Account

If you wish to allow other people to view the live image captured by this camera,

but don

‟t want to allow them to modify system settings, you can give them

user-level user name and password, so they can only view the image and can

not change any system setting.

This camera supports up to 16 users.

After you selected

„Account‟, you‟ll be prompted to input user account

information:

The descriptions of every setting in this menu will be given below:

Item

Description

User List

Lists all users currently available.

Input the login name (user name) of this account.

Password

Input the password of this user here.

Confirm

password

Input the password of this user here again for

confirmation.

Authority

Select the privilege of this user: Operator (able to enter

camera & video menu) or Guest (view images only, but

Guest account still needs to input User name/Password

Summary of Contents for IC-7100













































































































































































Search results

Summary of Contents for IC-7100

Reviews:

Related manuals for IC-7100

Brands by name

Popular brands

Edimax IC-7100, User Manual

Search results

Summary of Contents for IC-7100

Reviews:

Related manuals for IC-7100

Brands by name

Popular brands